Liquid manure spreader

Liquid manure spreader compatible with the Claas Xerion 5000 Trac VC
The next MOC in collaboration with Holgi.
Out of more than 2000 individual parts, a liquid manure spreader is created that comes very close to the original. Thus, both the towing hoses and the jockey wheel can be brought into the working position as well as into the transport position with the aid of the built-in gearbox. From the size, the model is perfectly designed for the Claas Xerion. Since the barrel has its own electrical supply, the towing vehicle does not need to be adapted. Even the required hitch is already present in the construction manual.
Transport position: 53 x 20 x 25 cm
Working position: 53 x 72 x 25 cm
Number of parts: 2094 (pneumatic hoses included)
The following parts are not included in the parts list:
Pneumatic Hoses:
Lightgray: 20x 52mm, 6x 44mm, 2x 36mm, 2x 28mm


Download Instruction and partlist at

Two-way Tipper

Another excellent Holger model for the agricultural vehicle fleet
Fully functional two-way tipper compatible with the Claas Xerion 5000 Trac VC
From about 900 parts creates a very realistic model with many details and fun.
Selection of the tilt direction by means of sliding lock
Tilting function by means of pneumatics
Additional pneumatic connection at the rear for another tipper
Both axles are sprung
Underlay wedge
Hitch for Claas Xerion already included in the manual
For the required compressed air the front weight with integral compressor is recommended


902 parts
lowered: 16.7 x 39.5 x 19.9 cm
tilted: 22.2 x 39.5 x 26.4 cm

Download Instruction

Partlist at

Cambridge Roller compatible to Claas Xerion

Fully functional Cambridge roller for attachment to the Claas Xerion.
All functions are pneumatic

Fold or unfold, move to working position and lift again into transport position.

To provide the required compressed air, there is an optional front-mounted compressor (MOC-17427 on

The parts for the compressor are already mentioned on the last page in this manual.

Highlights: All function via pneumatic,  Jockey wheel for parking

360 parts


Transport position - 310 x 190 x 90mm
Work position -
330 x 490 x 65mm

Download Instruction

Video here

Part List at or

Double Compressor for Claas Xerion

To supply additional equipment with sufficient compressed air, I built this compressor for the Claas Xerion.

The compressor can be optionally equipped with one or two pneumatic pumps.

Depending on how high the air consumption of the attachment is.

The attachment is modeled on the B model, so it can be mounted both front and rear.

The instructions also include the parts to lay the pneumatic line through the tractor.

Highlights: Option for one or two pumps

153 parts

Dimensions: 100 x 100 x 71mm

Download Instruction

 Part list at

Trabant 601 universal

This MOC was created in cooperation with Holgi. He designed the model, my job was the instruction.
The Trabant 601 universal is a nice replica of the original. From over 3000 individual parts here the famous Trabbi is recreated.
In the foreground was the most detailed appearance, which was implemented here to 100 percent.
The battery box is very cleverly housed in the boot, so that a battery replacement is no problem.

Highlights: Complete remote controlled by PF.

3061 parts

Dimensions: 45,7 x 21,4 x 19,6 cm

Instructions download at

20 feet Container for Linde Reach Stacker V1.0


364 parts

Dimensions:  24,6 x 9,5 x 11,2 cm

Instructions download at

Linde Reach Stacker

In cooperation with Holgi, a wonderful, natural-looking model has been created here. The Container Reach Stacker is a very nice replica of the original from the manufacturer Linde. From almost 1800 individual parts, a model with a length of over 40 cm is built, which is completely remote controlled. The remarkable thing about this model is that many "normal" stones are also built in this model. This results in a very high similarity to the original. The instructions for the container is also available.

Highlights: Complete remote controlled by PF.

1775 parts

Dimensions: 46,6 x 16,1 x 20,4 cm

Instructions download at

Hardtop for Sheepo´s Landrover Defender 110

A small but excellent extension for Sheepo's Land Rover Defender 110, designed by turocha.

Highlights: The rear door can be opened and closed. The porter can be removed with little effort, this creates a normal roof.

341 parts

Dimensions: 18,3 x 38 x 15,4 cm

Instructions download at

Classic car by metulskie8

Magnificent MOC of metulskie8

Highlights: PF remote controlled, in the model is a manual 3-speed gearbox fitted, the engine cover and the driver's door can be opened, the 16V motor is driven while driving.

Dimensions: ca. 40,5 x 19,5 x 12 cm

1289 parts

Download Instruction + Partlist

Various accesories for Unimog 8110

Various accessories for mounting on the Unimog 8110.

Download instructions

More accesories on

Lamborghini Gallardo

A reconstruction of the original from Boratko / Crowkillers to FullRC by metulskie8.

Dimensions: ca. 21,3 x 44,8 x 12,2 cm

The model consists of 1788 parts. The parts list is here free available.

There are 3 color shemes available.

Features: all-wheel drive, forward and reverse, left and right on PF remote control, the doors, the engine cover behind the engine hood opens, the piston in the engine move the drive itself.
The instruction is available here for 10 euros.

Specify the desired color during the checkout process, otherwise the standard instructions in red will be shipped.

More information on under MOCS.